Outboards - Yamaha Mid Power 4 Stroke (25 - 80HP)

Yamaha 70HP 4 Stroke

back to Yamaha Mid Power 4 Stroke (25 - 80HP)

PRICE: POA

Specifications

  • Engine Type Stroke, 16 Valve SOHCIn- line 4 Cylinder
  • Displacement 996 cc
  • Bore x Stroke 65 x 75 mm
  • Recommended Max RPM 5300 - 6300
  • Lubrication System Wet sump
  • Fuel Management EFI
  • Ignition TCI
  • Starter System Electric
  • Alternator Output 12V-17A with Rectifier Regulator
  • Operation Method Remote Control
  • Trim & Tilt Method Power Trim & Tilt
  • Gear Ratio 2.33:1
  • OEDA Emission Rating ***
  • Dimensions
  • Height
  • •F70AETL : 534 mm (21 in)
  • •F70AETX : 636 mm (25 in)
  • Weight
  • •F70AETL : 120 kg

Downloads

Description

F70AETL, F70AETX
New Four Stroke F70. One Step Ahead.

The new F70 is a further development of the F60, sharing the same displacement and stroke. The engine is lighter than any competitive four stroke or direct injected two stroke motor in the 70 – 75 horsepower class. The F70 achieves this by its unique four valves per cylinder design activated by a single overhead camshaft rather than the conventional dual camshaft design for 16 valve engines. This reduces the weight that would result from having an extra camshaft and the components that go with it.

For a remarkably light engine, the F70 punches well above its weight. Four valves per cylinder have dramatically increased this engines volumetric efficiency - the efficiency with which the engine can draw fuel and air in and push exhaust out of the cylinders. Increasing this efficiency means the F70 is able to run at a higher rpm with the max operating RPM being increased to 6300rpm. The resulting top end performance will be great for boaters who want to get to their favourite spot first – and who doesn’t?

ENQUIRY FORM

Fill in your details to enquire about the Product Name.

Enquire

Contact

Chivers Marine
31 Port Kembla Drive
Bibra Lake, WA 6163

Click for map

Tel: (08) 9434 1822

Tel: 1300 261 522
Fax: (08) 9434 1826

Our Major Brands

Testimonials

Luke and his team at Chivers Marine have produced 2 new boats for me; I can say without hesitation they know how to put a great boat together. Being a Quality Manager for a large Western Australian company my standards are very high and on both occasions I have been extremely happy; many thanks to Mark, Travis and again Luke for his patience.
Steve Dearle

Thank you to all at Chivers Marine for providing a wonderful experience when purchasing my new Chivers "Shark Series" boat. Working in retail I sadly find the level of service often lacking when I have to purchase something myself. Thank you for restoring my faith; the service was faultless right from the start with nothing being too much trouble (even working late on Christmas Eve to deliver the boat!).
David Bridge